|
Supporting construction frames are used to support and reliably transfer the loads from one–sided wall formwork to the concrete slab or footing below using either embedded pigtail or stop anchors.
|
 |
-
The frames of the system are all welded components eliminating 90% of the assembly labor of old style “A” frame systems.
|
-
The system is designed for a normal pour pressure of up to 1,000 psf.
|
-
The available sections are a base frame of 4.5 m plus add on frames of 1.5 m, 2.0 m and 2.4 m.
|
-
The bottom frames have both front and rear height-adjusting jacks.
|
-
A special fixing unit V is available to make setting the embeds at the correct angle and position a snap.
|
-
The system has roller and jack assemblies that allow a pair of frames with forms to be rolled from pour to pour.
|
|
| Pouring heights up to 15 ft. with supporting construction frame Universal F 4.50 m |
|
|
|
|
| Pouring heights up to 20 ft. in combination with attachable frame F 1.50 m |
|
|
|
|
| Pouring heights up to 26.5 ft. in combination with attachable frame F 1.50 m and attachable frame F 2.00 m |
|
|
|
|
| Pouring height up to 34 ft. in combination with attachable frame F 1.50 m, F 2.00 and F 2.40 m |
|
|
|
|
| Pouring height up to 42 ft. in combination with attachable frame F 1.50 m, F 2.00 m, and two F 2.40 m frames |
|
|
|
|
|
 |
References |
|
)
)
)
)
)
){kind=small}
){kind=small}
){kind=small}
