I consent to the use of cookies by this website for analyses and personalised content. Find out more OK
Back to overview

Dokaflex 1-2-4

The fast, ver­satile hand-set sys­tem

Dokaflex 1-2-4 is the fast, ver­satile floor-slab formwork for any de­sired lay­out. The quan­ti­ties are com­put­ed very sim­p­ly, us­ing the slide-rule, with no need for formwork plan­n­ing. Meet­ing in­di­vi­d­u­al re­quire­ments re­gard­ing the con­crete fin­ish is no problem, as any type of form-fac­ing can be cho­sen.


Adapt­a­bil­i­ty to all lay­outs
by te­le­s­cop­ing the formwork beams 

  • down­s­tand beams and floor ex­ten­sions can eas­i­ly be solved 'within the sys­tem'
  • per­fect adapt­a­bil­i­ty to columns and walls
  • op­ti­mis­ing for dif­fer­ent slab thick­ness
  • suit­able for shoring fili­gree slabs

Safe and fast to set up
thanks to pre-defined sys­tem grid 

  • search-times are min­imised by hav­ing on­ly two dif­fer­ent lengths of beam
  • the mark­ings on the beams make the sys­tem quick to set up and check

Durable and prac­ti­cal
thanks to its stur­dy sys­tem components 

  • high num­bers of re-use cy­cles and re­duced close-out costs, due to the shock ab­sor­bers and pro­tec­tors on the sys­tem components
  • site lo­gis­tics are sim­pli­fied by the per­fect­ly co-or­d­i­nat­ed sys­tem components
  • first-rate con­crete sur­faces, as any type of form-fac­ing can be se­lect­ed



Beam H20 ­top

Up to 3 times the lifespan, thanks to built-in shock absorber

  • effective protection against moisture and UV radiation, as beam-ends are sealed around web
  • fast, safe formwork set-up by referring to markings on the flanges
  • unmistakably identifiable, thanks to labelling option

ProFrame pan­el

The rentable panel with an all-round shock absorber

  • cuts costs with option to either purchase or rent
  • achieves high number of re-use cycles, with its all-round edge protection and special surface sealing
  • unmistakably identifiable, thanks to labelling option

Floor prop Eu­rex top

The first-ever floor prop with an impact protector

  • long-lived, due to impact protector
  • easy-to-turn adjusting nut, thanks to special thread geometry
  • less physical effort needed, thanks to the prop's low weight
  • operational safety achieved by consistently high load capacity of at least 20 (30) kN in accordance with EN 1065 - Class D/E


Here's how eas­i­ly the sys­tem works

1-2-4 – these are the maximum spacings for setting-up Dokaflex 1-2-4. Triangular marks on the beams serve as a built-in 'measuring tape'

  • 1 mark = maximum spacing of secondary beams
  • 2 marks = maximum spacing of props
  • 4 marks = maximum spacing of primary beams

Doka floor end-shut­ter clamp

This quick and easy system solution for stop-ends provides greater safety at the edges of floor-slabs, and high flexibility, with a choice of different attachment methods, types of stop-end and ways of safeguarding slab edges.

A clean so­lu­tion for down­s­tand beams

The Beam forming support 20 lets you quickly and accurately adjust the formwork for downstand beams, right down to the last millimetre. To do this, the Beam forming support is simply placed onto the secondary beams and tightened. This automatically pulls the side-formwork tight, for clean concrete faces.