Bracket platform M
The lightweight, site-ready working platform, protection platform and sloping-rooftop fall barrier
Tested safety
for reliable protectionPut the advantages of this EN 12811-1 certified Service and Working Scaffold to work for you
- high load-bearing capacity (max. 300 kg/m²) yet low dead weight
- safe platform workdeck, as the crane-hoisting points can be lowered out of the way
- safe corner transitions, thanks to Corner platform decking M
- winner of Safety Award from the European Agency for Safety and Health at Work
Fast, safe working
thanks to easy handlingReduced labour and crane times, thanks to
- pre-assembled units built from a small number of rugged system components
- ready for use straight away, after a very few quick and easy actions
- quick-connection feature for joining the bracket to the decking
Versatility
thanks to standardised system solutionsDepending on your needs, you can use these site-ready, lightweight platforms as
- working platforms
- protection platforms
- or as sloping-rooftop fall barriers
Outstanding cost-efficiency
on your projectAchieves cost-optimisation by
- having a long lifespan
- not taking up much storage and transport space (over 200 lin.m of platforms fit in one truck trailer)
References
System
The Bracket platform M in detail
- platform length 3.00 m
- high load-bearing capacity of up to 300 kg/m²
- quick-connection feature for joining the bracket to the decking
- bracket weighs only 32 kg
- long service life thanks to its sturdy design, varnished floor planking and galvanised steel construction
- captive connectors
- platform height can quickly be raised by 1.00 m
Suspension points
The wide (2.50 m) centre-distance between the brackets means that fewer suspension points are needed. The 3.00 m long platforms can be combined in any way desired, or used on their own for bridging gaps.
Corner platform decking M
The Corner platform decking M provides a safe corner transition. The whole unit can be quickly repositioned in just one crane cycle.
Corner platform decking M as outside corner
This corner solution is a quick and safe way to make outside corners.
Suspension methods
The Doka Suspension loop ES, for loop-type suspension points, complies with the rules of Load Class 4 to EN 12811-1 and DIN 4420.
Bridging openings
The Platform decking M 3.00m can also be used for bridging openings and for closures, without having to be modified first.
Platform extension
The Universal handrail lengthening piece M extends the operational range of the Bracket platform M so that it provides uninterrupted safety as a rooftop fall barrier.
Converting for use on pre-cast hollow walls
The Precast member head M makes it easy to convert the Bracket platform M into a pouring platform for pre-cast hollow-wall members.
Utilisation
Easy to handle
The Bracket platform M cuts costs by being ready for operation in only a few simple steps: Tilt up the railings – fix the bracket – hang the platform into place – that's it.
Areas of use
Working platform
Used as a working platform, e.g. on walls, the Bracket platform M makes for safe working thanks to its spacious width and close-meshed lattice railings.
Protection platform
DIN 4420 and ÖNORM B 4007 compliant protection platform. The Doka bracket platform M puts an end to the time-consuming and risky business of improvising protection platforms from separate brackets and planks.
Sloping-rooftop fall barrier
Combined with safety nets (mesh aperture max. 100 mm) and Universal handrail lengthening pieces M, the Bracket platform M can be used as a dependable sloping-rooftop fall barrier.
Fall-barrier safety scaffold
The Bracket platform M has a second drop-in rod on each bracket which enables it to be placed 1.00 m higher, e.g. to comply with regulations regarding the maximum drop distance to protection platforms.
Corner platform decking M used as outside and inside corners
The Corner platform decking M is designed so that it can also be used as outside as well as inside corners. The whole unit can be repositioned in a single crane cycle. This makes it possible to arrange platform layouts very quickly, even in corner zones. For the inside corner the two platform brackets are mounted in parallel with one another.
Platform transport fork K/M plus
The safe way of mounting and relocating the platform under roof-overhangs.
Logistics
The planking units and platforms are stored and transported separately. This greatly reduces the transport volume and makes such good use of the loading area that 200 lin.m of platforms will fit inside one truck trailer.
