Introduction

Timber-beam floor formwork

The Dokaflex hand-set systems let you form custom floor-slabs, drop beams and filigree slabs easily and quickly, while offering full flexibility with regard to the layout.

 

 

 

 

 

 

 

.

Dokaflex 1-2-4

The easy-to-use floor-slab formwork with a logical, built-in system for setting up the formwork

▪ marks on the beams show you the maximum spacings between secondary beams, props and primary beams, for floor-slabs up to a thickness of 30 cm

▪ having only 2 different lengths of beam facilitates logistics and reduces the time spent searching

▪ you can tell at a glance whether the formwork has been set up correctly

.

Dokaflex 20

The tailor-made solution for your specific project requirements:

▪ very little equipment is needed thanks to statically optimised beam and prop spacings, which are in accordance with the room geometry and the loads that occur

▪ drop beams and floor extensions can easily be managed 'within the system'

▪ significant reduction in commissioning quantities thanks to the Doka Xtra head, which allows early stripping

.

Dokaflex 30 tec

The timber-beam floor formwork with particularly sturdy components reduces the number of items needed and is fast to erect and dismantle, resulting in savings in labour costs.

The fast floor-slab formwork for forming large areas:

▪ fast working, as less equipment is needed

- 1/3 fewer floor props needed because of the higher load-bearing capacity of the I tec 20 beam

- smaller storage and transport volume

- wide access paths beneath the floor-slab formwork

- reduced follow-up costs

▪ suitable for shoring filigree slabs

.