Wall formwork
Instructions for assembly and use (Method statement)
The sequence shown here is based on a straight wall. However, you should always start to form from the corner outwards.
Ladders must be located so as to create viable 'traffic routes' in the horizontal. (On a straight wall, for example, one ladder on the first element and another on the last).
|
Preconditions for use: |
|---|
|
Platforms and all accessories must only be mounted to the element when this is face-down on the ground. |
|
It must be possible for all formwork set-up, pouring and stripping operations to be carried out from safe workplaces. |
.