Lifting of stacks
To lift stacked tableform superstructures, the Dokamatic lifting strap 13.00m is used with integrated strap shoes.
▪ Dokamatic table
▪ Dokaflex table
|
|
NOTICE Risk of damage to the bottom table if the Lifting strap is used without strap shoes. |
Max. number of elements in stack:
|
Dokamatic table |
6 elements |
|
Dokamatic S table |
4 elements |
|
Dokaflex table |
5 elements |
|
|
NOTICE The strap shoes must always be mounted to the 2nd secondary beam from the edge of the element. |
➤ Push the strap shoes of the Dokamatic lifting strap onto the secondary beam, firmly and completely.
|
A Dokamatic lifting strap 13.00m |
|
B Strap shoe |
|
|
Both strap shoes must be mounted to opposite ends of the same formwork beam! |
➤ Mount the strap shoes of the second lifting strap in the same way.
|
|
NOTICE With custom tables, allowance must be made for the following points: ▪ secondary beams may cantilever out further ▪ greater weight ▪ oblique pull of the lifting strap Reinforce the secondary beams by e.g. nailing on a strip of formwork sheeting. 
|
.