The rentable modular scaffold for forming and reinforcing-work
The Working scaffold Modul is the ideal add-on to Doka wall systems: with this rentable modular platform system, reinforcement operations can be carried out safely and quickly. It is equally suitable for use as a stair tower or a mobile scaffold tower. To speed up the construction workflow still further, the platform units can be repositioned by crane.
due to its modular system
can be used as bracing scaffolding, stair tower or scaffold access
vertically adaptable in a 50 cm height grid
adaptable in terms of layout, by means of ‘Modul’ hole-plates that each permit eight different connecting directions in one plane
has Intermixing Approval permitting combinations with other manufacturers' scaffolds
standards, ledgers, diagonals and decking boards can be systematically selected to make possible various different scaffold heights, bay lengths and bay widths
thanks to integral safety details
reliable structural integrity is ensured by the defined assembly sequence
enhanced safety against tipover, thanks to its widened support base and to the fact that it is braced against the formwork
tested anchorage points for personal fall-arrest systems (PFAS) enhance safety during system assembly
Can quickly be readied for use
as it is so easy to handle
controlled erection workflow due to the pre-defined connection-points on the ‘Modul’ hole-plate
boltless jointing technique using the wedge-locking principle
rigid, force-transmitting joints with just one blow of the hammer
the system is self-explanatory, which keeps familiarisation times short
units can be crane-lifted for faster cycling
The widened support base of the bracing scaffolding, and the fact that it is braced against the formwork, give it greater safety against tipover.
'Modul' hole-plate discs every 50 cm
eight connecting directions in each plane
small openings for the longitudinal connections
large openings for the diagonals
tube thickness 48 mm for coupler connections
'Modul' base collar
The 'Modul' base collar even allows the basic frame to be set up by just one person. Once the basic construction has been set up and aligned in the horizontal, the 'Modul' standards can be fixed on in the desired total length.
Even when the wedge is only loosely inserted, the scaffold node is positively locked. By hammering on the wedge until the hammer rebounds, a rigid, force-transmitting joint is then created.
Safe vertical access
as the planking units have a manhole and an integral ladder
Using 'Modul' as a mobile scaffold tower
Travel rollers can be used for easy wheeling of the scaffold to its next usage location.
Using 'Modul' as a stair tower
The modular system means that stair towers can be configured with the stairway units either in the same or opposite directions. Stair towers assembled from the 'Modul' system conform to Class A of EN 12811-1.
Thank you for your interest - Working scaffold Modul.
Please, fill in the form below to receive more information on this topic and access it conveniently from your email later.
All listed fields are required.