Cost-optimisation for your formwork and safety platforms, thanks to
You can interactively intervene in the planning programme whenever you wish, in order to incorporate changed conditions on the site into planning.
New ribbons (multi-function bars) replace menus and toolbars. There is a new quick-access panel that you can configure with the commands you need most frequently. The "undo" function works over several steps.
Tooltips optimise handling and are rounded out by the Help feature plus comprehensive e-learning contents.
Interactive intervention enables you to incorporate changed conditions on site into planning. After forming, the structure can be modified, deleted or extended.
Ground plans, sections, photos and texts from other programmes can be integrated without difficulty.
Several Tipos-Doka programs can be open at the same time
3D poster graphics are significantly faster now.
In the following systems, 4 pcs. Framax transport bolt have been added as a supplementary (= automatically listed in the bill of materials in every project of the system in question).
All these new solutions are plannable in the automatic and interactive modes.
Framax Xlife plus framed panels can be ordered with custom widths in all standard heights. For technical production reasons, these custom panels are divided into four width categories:
For DokaScaff some assemblies are now available as modular system blocks to ensure that the needed heights and widths can be put together easily and quickly.
You can define the spacing of the panel-size displays in 'Options'.
You have to set 'Favourites' in the appropriate systems in order to use them in our planning programmes.
Form-tie solutions with head anchors are now available for the following systems:
The basic panel heights have been extended to include 1.35m, 2.70m and 3.30m.
'Hinged outside corner A galvanised' and 'Hinged inside corner I galvanised'
The 3S basic and 3S cut formwork sheets are available in the floor formwork systems
Efficient, programme-aided cycle planning. The result can be controlled and influenced by input parameters The cycles are visualised and you can subsequently make whichever changes you wish in an interactive dialogue.
The second generation of Framax Xlife plus is available in Tipos-Doka
Similar to Dokadek 30 you can now also plan Dokadek 20 with Tipos-Doka.
The accessory systems 'Counter railing - Edge protection system XP' and 'Counter railing - Handrail post 1.10m' are now available for the following systems:
For the formwork systems Frami Xlife and Frami eco, formwork solutions up to a height of 6 m are now available.
The formwork system Frami eco has been extended to include the basic panel height of 2.70 m.
The following systems now include corner solutions with the models 'hinged outside corner A galvanised' and 'hinged inside corner I galvanised':
This programme extension supports copying of structure and formwork (wall, floor and platform) between two Tipos-Doka projects.
In Tipos-Doka several slab edges for a slab span can now be automatically generated.
Inaccurate structure contours (e.g. from DXF plans) can now be corrected with the new command "Structure / Edit / Correction" in Tipos-Doka.
The formwork sheeting types 3S top, basic, cut have been added to the following wizards:
In the following wizards the user interface has been revised:
Tipos-Doka is especially suitable for fast planning of system formwork. Ideal for foremen planning the next day's forming operations, as well as for staff in scheduling departments. As Tipos-Doka also takes account of quantities when doing the planning, this also helps with the logistics. Formwork solutions for which there is not sufficient equipment on the site will not be included in the plan.
Updates are available for download. This includes a complete setup. It is recommended that you uninstall the existing version of the programme, and then install the current setup.
You can email questions about installation and authorisation to ESS@doka.com. For questions about how to use the programme, please use the built-in Help function. For formwork-engineering questions, please contact the Applications Technology Dept. at your nearest Doka branch.
Tipos-Doka can open Tipos-Doka project files from the current and previous versions. This applies to max. two version levels before the current version. It can also import layouts from DXF files, and has a wide range of filtering functions for the geometrical elements to be imported. The layout can then be either redrawn or directly imported.
Tipos-Doka plans Doka formwork, but it is an easy-to-use Windows programme. The user interface makes use of terms that are common in the construction and formwork-engineering fields, so it is obviously an advantage to have technical knowledge in these areas. The same goes for basic skills in Microsoft Windows.
You can call up a Help box for every menu item and dialogue. To help you get started working in Tipos-Doka quickly and efficiently, we recommend the courses organised by Doka.
Item prices are subject to change and depend on the country and currency. In addition, rental offers, for example, will depend on additional factors such as the length of the rental. To get an offer for a project that you have planned with Tipos-Doka, please contact your nearest Doka branch. Tipos-Doka project files can be read in electronically at all Doka branches as the basis for an offer.