The heavy duty supporting construction frame for single-sided walls of up to 12.80 m height
thanks to attachable frame construction
optimum adaptability to required pour-height since compatibility with Supporting construction frame Universal F 4.50m, Attachable frame F 1.50m, Attachable frame F 2.00m, Heavy duty attachable frame F 2.40m
high flexibility due to suitability for timber-beam and framed formwork
adapts to uneven ground by means of spindles with articulated footplates
Quick and easy
thanks to ready-to-use frames
simple handling due to integral lifting-brackets enabling the frames to be lifted in their respective centre-of-gravity and ready-mounted couplers for connecting the bracing (scaffolding tubes)
fast and crane-free re-positioning thanks to easy-to-mount rollers
frames can be immediately installed – no pre-assembly necessary
easy vertical stacking due to „attachable frames“ with pre-mounted stacking plates
Comprehensive workplace safety
with compatible ladderways and working platforms
tensile forces are reliably transferred by means of diagonal anchors
integral spacers prevent stacked frames from sliding off one another during storage and transit
adjusting for different fresh-concrete pressures required is easy and economical – simply increase or decrease the spacing between the supporting construction frames, as appropriate
full line of safety accessories for intermediate platforms and pouring platforms, and for access systems
Vertical stacking configurations for wall heights of up to 8.10 m
pour-heights of up to 4.50 m are possible with Supporting construction frames Universal F 4.50m
pour-heights of up to 6.00 m are possible by adding an Attachable frame F 1.50m
pour-heights of up to 8.10 m are possible by adding an Attachable frame F 1.50m and an Attachable frame F 2.00m
Wall heights above 8.10 m
for walls of up to 10.40 m in height, the Supporting construction frame F can be stacked on top of an Attachable frame F 2.40m
When the Supporting construction frame F is stacked on top of two Attachable frames F 2.40m, pour heights of up to 12.80 m are possible
Supporting construction frame Universal F
Single sided walls up to 12.80 m can be formed with the supporting construction frame Universal F. These large and high units can be shifted with attachable rollers.
Single-sided walls in a single pour
Combining extra-large Framax Xlife panels with the Supporting construction frame Universal F makes it possible to pour even very high walls in one continuous operation.
Positioned in the horizontal and anchored to the structure, Supporting construction frames can be used to make heavyduty platforms for formwork assignments at lofty heights.
Thank you for your interest - Supporting construction frame Universal.
Please, fill in the form below to receive more information on this topic and access it conveniently from your email later.
All listed fields are required.
Consent to cookies & data transfer to the United States of America
We request your consent
2) to the transfer to the United States of America of data obtained through the cookies
to continuously improve the functionality of our website,
to facilitate the experience of using the Doka Online Shop, or
to place advertising suitable for you as user on certain platforms.
See our Data Privacy Statement for more information about our cookies.
We also offer you the possibility of selecting your cookies (advanced cookie settings).
2) Data transfer to the United States of America
Some of our partners are entities established in the United States of America. We transfer your personal data manually or via an interface to these partners in the United States of America.
We would like to inform you that the ruling of 16 July 2020 (Court of Justice of the European Union judgement in case C-311/18, “Schrems II”) invalidates the EU - U.S. Privacy Shield decision that permitted a transfer of personal data to the United States of America. In consequence, as a third country the United States of America does not offer an adequate level of data protection.
For you as user, the risk that the transfer of personal data to an entity established in the United States of America is in particular that your data are subject to access by the United States authorities for monitoring and surveillance purposes and that to a large extent you are without effective administrative and judicial right of redress against such action by the United States authorities.
Personal data that we transfer to the United States of America are in particular IP addresses (Internet Protocol addresses).
We co-operate via various applications with the following recipients:
Monotype Imaging Holdings Inc.
Rocket Science Group LLC
The Trade Desk, Inc.
We require your explicit consent to continue sending your personal data to these providers.
You can revoke your consent with effect for the future at any time, by accessing the cookie settings on the website.