These tried-and-tested systems give your site crew optimum protection and make a significant contribution to a smooth workflow. When the crew are properly protected, they work safely, which also means more rapidly and thus more efficiently – for your success.
in every phase of the work
Doka handrail posts & clamps provide comprehensive safety
against fall hazards
on the structure and the formwork
thanks to their high quality (hot-dip galvanised)
conform to EN 13374 Class A
Convenient and easy to mount
thanks to their many different fixing methods
Doka handrail posts & clamps are quick and easy to mount
by quick-fixing with a wedge
as the only tool needed is a hammer
as they can be used in many different situations
Put the versatility of the Doka handrail posts & clamps to work for you:
For safeguarding exposed edges on buildings, the Handrail clamp S can easily be attached to any point on a timber formwork beam. Its wide clamping range means that it can be used for putting up guard rails in many different parts of the site, on the formwork and the structure.
Handrail clamp T
The Handrail clamp T provides a high level of safety: from when the slab or superstructure is cast until the permanent railings are erected. This clamp can be fixed anywhere: to reinforcement hoops or to Bridge edge beam anchors – with no need for any adapters or accessories. A wide range of additional applications for fall-arrest barriers on precast concrete stairways or hollow-element walls is also possible.
Handrail post 1.10m
The Handrail post 1.10m is a fast and very safe way of putting up safety railings. Handrail posts 1.10m can be deployed along slab-edges, floor openings or other fall-hazard locations, or for opposing guard-rails on wall formwork. The hot-dip galvanised all-steel construction of the Handrail post 1.10m gives it a very long lifespan.
The Handrail post 1.10m is very quick and easy to mount:
in an attachable sleeve or screw-sleeve in soft concrete
in a hole subsequently drilled in the concrete
in the cross borehole of a framed formwork panel, using a hexagon nut