I consent to the use of cookies by this website for analyses and personalised content. Find out more OK
I consent to the use of cookies by this website for analyses and personalised content. Find out more OK

Wall formwork FF100 tec

The high-load timber-beam formwork with a system grid

The pre-assembled standard elements of Doka timber-beam formwork FF100 tec combine the advantages of timber-beam formwork with the grid-related advantages of a framed formwork system. Their very high load-bearing capacity offers a new degree of freedom when it comes to fulfilling architectural specifications in a cost-effective way. FF100 tec is suitable for fair-faced concrete categories SB1 to SB4, as defined in the DBV Code of Practice.


High pouring rates

made possible by extra-strong components 

Up to a pour-height of 3.60 m, only two 20.0 form-ties are needed, thanks to

  • the 80 percent higher load capacity of the I tec 20 composite formwork beam compared to conventional H20 timber formwork beams
  • the stiff FF100 tec walings WU14, with their welded-on plates

Maximised utilisation of equipment

and ease of handling 

Lowers commissioning quantities and forming-times because

  • the small number of element widths, in a 25 cm grid, are simple to plan
  • of the rapid availability made possible by the system's site-ready elements with/without form-facing
  • of the improved formwork element connectors, with their optimised pull-tight and push-apart function

Fair-faced concrete formwork

made of ready-assembled standard elements 

Superb concrete surface, with no screw imprints in the concrete, as

  • the form-facing is screwed on from the rear
  • the form-ties are located well inside the element, in a symmetrical pattern
  • the pre-assembled beam grilles mean that any type of form-facing can be used
  • the integral corner reinforcement angle ensures dependable sealing of the joint between the form-ply sheets at the outside corners

Comprehensive workplace safety

with compatible ladderways and working platforms 

  • safe vertical access with the Ladder system XS
  • workplace safety on all sides with the 'Platform system Xsafe plus' or with pouring platforms
  • practical accessories – such as panel struts, lifting/repositioning devices etc. – make for safe, easy handling of the formwork