The site-ready timber-beam formwork with a system-grid and no frame imprints
An optimal concrete result was achieved for the new construction of the G3 Shopping Resort Gerasdorf shopping centre thanks to Wall formwork FF20.
FF20 standard elements can be used in conjunction with stacking elements to obtain practical formwork heights of up to 6.50 m. The 2.75 m high elements are symmetrical and can also be used upside-down.
The Fastening bolt FF20, with a star grip nut, centres and connects the vertically stacked elements in a slippage-free manner. A turn-lock makes it easier to screw on the star grip nut.
The Formwork element connector FF20/50 Z makes light work of pulling the ready-assembled FF20 elements together tightly to make an absolutely crane-handling-safe, non-slip join.
The pre-assembled elements are linked together in a 25 cm grid, permitting optimum adaptation to the structure.
Right-angled corners are also easy to form using the modular elements, even with different wall thicknesses of up to 60 cm.
FF20 hinged corners provide professional solutions for acute and obtuse-angled corners.
Wall formwork FF20 is also ideal for wall pillars.
FF20 can also be dimensioned for use in the horizontal – for casting floor-slabs and walls in a single pour, in fair-faced concrete quality.
Doka 3-SO three-ply sheets provide the basis for many Doka formwork systems and have a wide range of…
Reliably casting concrete surfaces in the desired fair-faced concrete category is quite a challenge,…
The pre-assembled, fold-out working platforms, with their integrable front/rear and side railings, l…