Heavy loads easily transferred
The UniKit shoring tower 1000 is ideal for transferring extreme loads in the infrastructure and highrise construction sectors. On the basis of legs and telescopic struts as main components, the ingeniously engineered system maximises versatility and adapts to virtually any structure geometry. The modular system components convince by a wide range of connection possibilities, integrated connection lugs, enabling simple and fast assembly.
When combined with UniKit primary and secondary beams, efficient Doka shoring solutions are the result. Together with the Doka services tailored to your needs and provided on request - everything from a single source.
Struts:
![Struts - Shoring tower 1000]()
Available lengths
0,25 m | 0,50 m | 1,50 m
3,00 m | 4,50 m | 6,00 mTelescopic struts:
![Telescopic struts - Shoring tower 1000]()
Available types
100-137cm | 150-218cm
221-350cmAccessories:
![Accessories Shoring tower 1000]()
UniKit lowering head
UniKit end connectorsBenefits ![High load-bearing capacity]()
High load-bearing capacity Thanks to load-bearing capacity up to 1000 kN/leg, so heavy loads can be transferred by a small number of legs forming load-bearing frame, tower or multi-leg tower configurations. This efficient solution reduces the quantity of equipment needed and space, required on site.
![Precise transfer of loads]()
Precise transfer of loads Telescopic struts and a huge range of leg lengths enable flexible adaptation of the tower height and width. So loads can be transferred to exactly the spot that statics require.
![Quick assembly]()
Quick assembly The permanently integrated connection lugs and use of pins for adjustment of teleskopics struts to required dimensions save time considerably. Variable centring pins on the strut head maintain positional security and expedite the job of erection / connection.
Flexible for each application
The UniKit heavy-duty system enables particularly precise and precise and efficient use. Depending on the application and job-site conditions the shoring tower 1000 can be used as a tower or as a load-bearing frame. Heavy loads can thus be transferred exactly and transferred in a space-saving manner close to the adjacent building geometry, e.g., at the bridge abutment.
![Shoring tower 1000]()
![Load disc - Shoring tower 1000]()
![]()
Systemdetails
![Centring bars]()
Two components for fast and safe heavy shoring solutions Doka UniKit leg and telescopic strut.
![Appropriate primary beams]()
Required strut lengths are quickly pinned together - the Doka UniKit telescopic struts are used as horizontal and diagonal bracings.
![Doka UniKit Zentrierleisten]()
The Doka UniKit leg combines high load-bearing capacity with versatility thanks to the unified hole grid and the accessories.
![Unikit shoring tower 1000]()
Connectable UniKit primary beams enable load transfer to the UniKit shoring tower 1000.
Shoring tower 1000 | References
XXXLutz | Österreich
- Construction method: Structural engineering, in-situ concrete
- Challenge: Transfer of high point loads from ceiling cantilevers
- UniKit solution: UniKit load tower 480 as well as UniKit load tower 1000 together with UniKit stringers
- Customer benefit: fewer different components required: this creates clarity, simplifies assembly and reduces space requirements on tight construction sites
Get in touch
The international experience of Doka gives you pooled, concentrated knowledge for a successful project. Your contact person will help you find the best individual solution, to make your project's 'bottom line' a success, too. In short: expert specialised formwork planning with lasting benefits for your infrasructure construction project.
