Bracket plat­for­m M

The lightweight, site-ready work­ing platform, pro­tection platform and slop­ing-roof­top fall bar­ri­er

The Bracket plat­for­m M is a site-ready, lightweight work­ing and pro­tection platform that gives a big boost to safe­ty in the field of ma­son­ry and pre-cast con­struc­tion. The win­n­er of an EU award, the Bracket plat­for­m M com­plies with both EN 12811-1 (for use as a work­ing platform), and DIN 4420 (for use as a pro­tection platform).


Test­ed safe­ty
for re­li­able pro­tection 

Put the ad­van­tages of this EN 12811-1 cer­ti­fied Ser­vice and Work­ing Scaf­fold to work for you

  • high load-bearing ca­pac­i­ty (max. 300 kg/m²) yet low dead weight
  • safe platform workdeck, as the crane-hoist­ing points can be low­ered out of the way
  • safe corn­er tran­si­tions, thanks to Corn­er platform deck­ing M
  • win­n­er of Safe­ty Award from the Eu­ro­pean Agen­cy for Safe­ty and Health at Work

Fast, safe work­ing
thanks to easy han­dling 

Re­duced labour and crane times, thanks to

  • pre-as­sem­bled units built from a small num­ber of rugged sys­tem components
  • ready for use straight away, af­ter a very few quick and easy ac­tions
  • quick-con­nec­tion fea­ture for join­ing the bracket to the deck­ing

thanks to stan­dardised sys­tem so­lu­tions 

De­pend­ing on your needs, you can use th­ese site-ready, lightweight plat­forms as

  • work­ing plat­forms
  • pro­tection plat­forms
  • or as slop­ing-roof­top fall bar­ri­ers

Out­s­tand­ing cost-ef­fi­cien­cy
on your pro­ject 

Achieves cost-op­ti­mi­sa­tion by

  • hav­ing a long lifes­pan
  • not tak­ing up much stor­age and tran­s­port space (over 200 lin.m of plat­forms fit in one truck trail­er)



The Bracket plat­for­m M in de­tail

  • platform length 3.00 m
  • high load-bearing capacity of up to 300 kg/m²
  • quick-connection feature for joining the bracket to the decking
  • bracket weighs only 32 kg
  • long service life thanks to its sturdy design, varnished floor planking and galvanised steel construction
  • captive connectors
  • platform height can quickly be raised by 1.00 m

Sus­pen­sion points

The wide (2.50 m) centre-distance between the brackets means that fewer suspension points are needed. The 3.00 m long platforms can be combined in any way desired, or used on their own for bridging gaps.

Corn­er platform deck­ing M

The Corner platform decking M provides a safe corner transition. The whole unit can be quickly repositioned in just one crane cycle.

Corn­er platform deck­ing M as out­side corn­er

This corner solution is a quick and safe way to make outside corners.

Sus­pen­sion meth­ods

The Doka Suspension loop ES, for loop-type suspension points, complies with the rules of Load Class 4 to EN 12811-1 and DIN 4420.

Bridg­ing open­ings

The Platform decking M 3.00m can also be used for bridging openings and for closures, without having to be modified first.

Platform ex­ten­sion

The Universal handrail lengthening piece M extends the operational range of the Bracket platform M so that it provides uninterrupted safety as a rooftop fall barrier.

Con­vert­ing for use on pre-cast hol­low walls

The Precast member head M makes it easy to convert the Bracket platform M into a pouring platform for pre-cast hollow-wall members.


Easy to han­dle

The Bracket platform M cuts costs by being ready for operation in only a few simple steps: Tilt up the railings – fix the bracket – hang the platform into place – that's it.

Ar­eas of use

Work­ing platform

Used as a working platform, e.g. on walls, the Bracket platform M makes for safe working thanks to its spacious width and close-meshed lattice railings.

Pro­tection platform

DIN 4420 and ÖNORM B 4007 compliant protection platform. The Doka bracket platform M puts an end to the time-consuming and risky business of improvising protection platforms from separate brackets and planks.

Slop­ing-roof­top fall bar­ri­er

Combined with safety nets (mesh aperture max. 100 mm) and Universal handrail lengthening pieces M, the Bracket platform M can be used as a dependable sloping-rooftop fall barrier.

Fall-bar­ri­er safe­ty scaf­fold

The Bracket platform M has a second drop-in rod on each bracket which enables it to be placed 1.00 m higher, e.g. to comply with regulations regarding the maximum drop distance to protection platforms.

Corn­er platform deck­ing M used as out­side and in­side corn­ers

The Corner platform decking M is designed so that it can also be used as outside as well as inside corners. The whole unit can be repositioned in a single crane cycle. This makes it possible to arrange platform layouts very quickly, even in corner zones. For the inside corner the two platform brackets are mounted in parallel with one another.

Platform tran­s­port fork K/M plus

The safe way of mounting and relocating the platform under roof-overhangs.


The planking units and platforms are stored and transported separately. This greatly reduces the transport volume and makes such good use of the loading area that 200 lin.m of platforms will fit inside one truck trailer.