Pro­tection screen Xclimb 60

The vari­able en­clo­sure for all high-rise pro­jects

The Pro­tection screen Xclimb 60 lets you car­ry out con­struc­tion work in the top build­ing-lev­els of high-rise pro­jects in great safe­ty, and pro­tect­ed from the weather. Pro­tection screen Xclimb 60 is a hy­drauli­cal­ly climbed sys­tem that can al­so be quick­ly re­po­si­tioned by crane if suf­fi­cient craneage is avai­l­able. Be­cause it is struc­ture-guid­ed at all times, it can be op­er­at­ed even in windy con­di­tions. The sys­tem comes in sev­er­al ver­sions, giv­ing you the ide­al so­lu­tion for ev­ery re­quire­ment.


Safe work­ing con­di­tions
at any struc­ture height 

  • ga­p­less en­clo­sure pro­tects your site-crew from fall hazards, wind and weather
  • safe re­po­si­tion­ing, even in windy con­di­tions, as the sys­tem is struc­ture-guid­ed at all times
  • pro­tection against items be­ing dropped is en­sured by hor­i­zon­tal and ver­ti­cal seal­ing – even dur­ing the lift­ing op­er­a­tion

suit­able for all shapes and heights of struc­ture 

  • can be adapt­ed to any shape of lay­out, thanks to its in­tel­li­gent mo­d­u­lar sys­tem
  • ad­justable floor sup­ports per­mit use on fa­cades with both vary­ing and con­s­tant in­cli­na­tions
  • work­ing plat­forms can be re­lo­cat­ed to ac­com­mo­date non-con­s­tant storey heights

Boost pro­duc­tiv­i­ty
and cut costs 

  • high­er pro­duc­tiv­i­ty, from an en­hanced feel­ing of safe­ty
  • greater in­de­pen­dence in the con­struc­tion se­quence, as climbing op­er­a­tions can al­so take place when the formwork is still in place be­neath the slabs
  • cer­tain­ty re­gard­ing costs, when the pro­tection screen is pre-as­sem­bled by Doka
  • mo­bile hy­draulic sys­tem saves on craneage



Pro­tection screen Xclimb 60 with Framed en­clo­sure Xbright

The Framed enclosure Xbright is a fully rentable protection-screen system that can be fitted with either a translucent but wind-impermeable and non-see-through polycarbonate inlay, or with a mesh inlay. The large framed panels, and the simple method for connecting these together, keep site-erection times short.

De­sign variant with po­ly­car­bo­nate in­lay

  • translucent
  • wind-impermeable
  • non-see-through

De­sign variant with mesh in­lay

  • translucent
  • wind-permeable

All-round safe­ty

The translucent polycarbonate inlay provide natural lighting of the enclosed work-deck levels across the whole area of the enclosure. What is more, it is wind-impermeable and non-see-through, which gives the site crew a much greater feeling of safety and so boosts their productivity.

Pro­tection screen Xclimb 60 with trape­zoi­dal me­t­al sheet en­clo­sure

The combination of Xclimb 60 and a trapezoidal metal sheet enclosure is also a tried-and-tested safety solution on difficult structure geometries. The protection screen can be dimensioned very flexibly, permitting last-centimetre adjustment to any shape of layout. All gaps are closed off to prevent any tools or other small items being dropped, which increases the standard of safety still further.

De­sign variant with trape­zoi­dal me­t­al sheet

  • wind-impermeable
  • non-see-through

De­sign variant with per­fo­rat­ed trape­zoi­dal sheet

  • translucent
  • wind-permeable

Table Lift­ing Sys­tem TLS – the ide­al add-on for all Doka pro­tection screens

The Table Lifting System TLS is the safe way to reposition floor-slab formwork, tools and other equipment with no need for a crane. The TLS can be used not only as a variant that is suspended from the structure, but also as a self-climbed system, and can easily be integrated into the Doka protection screens.