Behind the nondescript acronym ‘BW 595b’ is the new, 755 m long Sinntal Viaduct. It was built directly alongside the old bridge as a 53.00 m high steel composite bridge with a radius of 1290 m, resting on 14 elegant hollow piers with support centres of up to 107.00 m. The whole project was carried out by contractors Max Bögl of Neumarkt, Bavaria.
Tight space constraints between the inside median parapets
To cast the 0.75 m high and 0.43 m wide cantilevered parapets from CIP concrete, the construction firm relied on the versatile Doka forming wagon TU. Two complete wagon-trains, each 28.00 m long, were in service here – one for the outer parapets, the other for the median parapets. Space between the fair-faced concrete median parapets was extremely limited, as the two new carriageway decks, with a total width of 30.10 m, are only 10 cm apart.
The Forming wagon TU is a bridge-edge forming wagon that is attached beneath the cantilever slab. Being fully underslung, there are no constructional components that would obstruct operations on the top of the bridge. This means that the concrete can be reinforced, poured and struck off without hindrance, and thus quickly. The ‘Capped support shoes TU’ are fixed onto the underside of the cantilever slab either from a crane-cage or from a positioning platform. This unit also has an integral launching nose which enables the ‘Travelling profiles’ to be precisely guided into the ‘Capped support shoes TU’.
Workplace safety in every situation
The ‘Capped support shoes TU’ themselves are fixed to the type-tested Doka bridge edge beam anchors, permitting cantilever-slab inclinations of up to 15°. To prevent the construction rolling on accidentally, the wagons are fitted with self-actuating gravity brakes that automatically release when the wagon-train is towed.
To tow the wagon-trains, the site used a telescoping stacker truck. Alternating between the two forming-wagon trains, the well co-ordinated team cast 24.00 linear metres of cantilevered parapet a day, in fair-faced concrete that is definitely worthy of the name.
Cliented opted to purchase rented forming wagons
Before work on the site had even finished, the Max Bögl construction company decided to exercise its purchase option on the Forming wagons TU that it had been renting. This came as no surprise to Doka consultant Marcus Günther: “Right from the very first usage cycles, Bögl were absolutely convinced by the speed and precision of the Forming wagons TU.”