The self-climbing forming and working platform for any highrise core
The Platform SCP has room for all the site equipment needed, and is fully enclosed for safe, weather-shielded working, even at great heights. Powerful hydraulic cylinders cranelessly raise the platform, formwork, equipment containers and concrete placing boom to the next casting section, in only one lift.
for the entire site
safe, weather-shielded working made possible by the large, fully enclosed workspace
prevents fall-hazard locations opening up during repositioning, as the entire platform is raised hydraulically in one lift
integrated platforms, stair towers and ladders provide complete safety during working operations and for up-and-down access
in a systematic sequence
quick and easy to reposition in only a few operational steps, as it is 'climbed' at the push of a button
short forming-times, as the formwork suspended from the girder grille is easy to close and open
speeds up the workflow, as the crew enjoy an enhanced feeling of safety at all heights
for your high-rise core
saves on craneage, as the platform can also transport high payloads, including equipment containers and concrete placing booms, when it climbs
can be adapted to any requirement, thanks to its modular system and to the fact that there are several different ways of suspension-mounting it to the structure
optimised construction sequences achieved by the planning and engineering services of the Doka Competence Centre
With this construction method, the core area is formed ahead of the trailing floors. Producing walls and floors separately allows for a simpler construction workflow with focus on the individual component.
Floors and walls cast in one pour
Floors and walls are produced in one step (monolithic). With ideal planning, short distances for site crew and crane ensure additional acceleration.
Sophisticated logistics, ease of operation
The high service loads that are possible on the Platform SCP save storage space on the site at ground level. For even faster cycle times, the reinforcement operations can also be carried out above the platform. The system makes it possible to suspend working platforms that reach deep down into the shafts, enabling the crew to start carrying out finishing-jobs while the concreting works are still underway.
System solutions for smooth construction workflows
(A) easy site logistics made possible by openings in the decking, for equipment-handling or fitted components such as stairways
(B) safe access routes by using stair towers both on and inside the platform
(C) short distances for crew to cover thanks to nearby storage areas with high live load rating for rebar and site installations
(D) construction workflow is optimised by integrating concrete placing booms
Upwards at the push of a button
Together with the working platform, timber-beam or framed formworks are raised to the next casting section in a single lift, by powerful hydraulic cylinders.
Ample space and safety at any height
Working just like on the ground thanks to closed platform levels and generous stripping paths.
Edge protection system XP
Doka Safety Systems
This system is the universal safety solution for all edge protection needs. It fits in ideally with …
Please, fill in the form below to receive more information on this topic and access it conveniently from your email later.
All listed fields are required.