Dokadek 30 is a beam-less, hand-set formwork system designed as a lightweight strip galvanized and cathodic dip painted steel frame faced with a wood/plastic-composite sheet.
Quick to put up quick to take down.
as there are far fewer parts to be shifted. This greatly speeds up the forming operations. The entire system has only three different components: panels, heads and props.
because this operation takes up around 33 % of the total forming time. With Dokadek 30, the panels are stripped out without any timeconsuming overhead work. The DekDrive then lets you shift up to 12 m² of Dokadek 30 at a time.
which means that work can move ahead rapidly, independently and without interruption. There are no unproductive downtimes spent waiting for the crane, as the equipment does not need to be lifted onto the floor-slab formwork. In other words, the crane is no longer a ‘choke-point’ during formwork set-up. It is only needed occasionally, to help with closing infill and intermediate zones.
Productivity on safe ground.
The rectangular shape of the Dokadek panels also makes it easy to form higher slabs from the safety of floor-level work: Simply hold the panels by the ergonomically shaped grip-holes, lift them and hook them into the Dokadek heads, then raise the free end with the Dokadek assembling tool.
Easy to explain, easy to use.
Because Dokadek 30 has so few separate parts, and such a straightforward erection sequence, even semi-skilled labourers can soon use it correctly. Right from the word ‘go’.
The clearly defined erection sequence prevents the crew from attempting dangerous improvisations, and ensures a consistently high safety level – even when semi-skilled labour is deployed. Because of the number of props and how they are arranged, with Dokadek 30 there is no need to dimension the system in advance. Without additional measures a slab thickness of up to 32 cm is possible.
There are only two different sizes of panel, which simplifies logistics on the site and means there is no time wasted searching for the right parts. The forming operations themselves go much more smoothly, too.
thanks to the tried-and-tested Xlife sheet.
The innovative coating made of glass fibre reinforced plastic ensures even greater resistance to scratching and mechanical damage. This means positive impressions on the concrete and rework costs are cut even further.
The final results are clear to see: a small number of joints, all of them neat and tidy as well as a uniform concrete finish.
Dokadek 30 standard system
Earlier stripping with the Dokadek 30 standard system, based on actual concrete compressive strength with Concremote.
Traditional early stripping with drop-head
The floor-slab stays safely shored with the Doka Eurex floor props until the required concrete strength has been reached.
You define the working method
The forming method chosen will depend on e.g.
Every construction task needs individualised solutions. The Doka Formwork Experts will be pleased to advise you.
The new equipment line-up for high speed on large areas and fast adaptation in infill zones.
The professional solution for combining efficiency on large areas and around edges.
The proven combination for high forming rates and maximum flexibility.