Large-area formwork Top 100 tec
The super-strong timber-beam formwork for any requirement
Lower labour costs
due to the optimised waling planes
Large form-tie pattern, yet with the same permitted fresh-concrete pressure
- low installation costs, as there are up to 30 percent fewer form-tie points
- fewer manhours, as there are up to 30 percent fewer connectors
Fast pouring
enabled by the high permitted fresh-concrete pressure
Can also be dimensioned, without restriction, for easy-workability and/or self-compacting concretes, thanks to
- the heavy-duty I tec 20 beam
- the Top100 tec waling WU14
- the Tie-rod system 20.0
Cuts costs in the civil engineering field
with its very high degree of equipment utilisation
Reduced materials usage, and easier site-erection, as
- parallel girderframe units can be spaced wider apart on bridges
- the optimised hole-grid allows great freedom when installing form-ties and accessories such as spindle struts
- it permits continuous adaptability to the desired form-tie pattern
Architectural stipulations can be realised economically
as large form-tie patterns are possible and any type of form-facing can be used
Superlative concrete finishes, as
- the stiffer elements improve surface planeness
- the form-facing is screwed on from the rear, leaving no screw-head imprints
- the optimised formwork element connector means there is less bleeding
Comprehensive workplace safety
with compatible ladderways and working platforms
- safe vertical access with the Ladder system XS
- workplace safety on all sides with the Platform system Xsafe plus
- practical accessories – such as panel struts, lifting/repositioning devices etc. – make for safe, easy handling of the formwork
References
Suitable products
3-ply sheets
Doka System Components
Doka 3-SO three-ply sheets provide the basis for many Doka formwork systems and have a wide range of…
Sealings for fair-faced concrete
Doka System Components
Reliably casting concrete surfaces in the desired fair-faced concrete category is quite a challenge,…
Platform system Xsafe plus
Doka Safety Systems
The pre-assembled, fold-out working platforms, with their integrable front/rear and side railings, l…
