Multi-ply formwork sheets
the right solution from infill zones to rentable panels
Doka multi-ply formwork sheets are used in very many Doka formwork systems. The broad spectrum – ranging from DokaPly to the Xlife sheet – allows Doka to offer ideal solutions for many different requirements from infill zones to fair-faced concrete.
Dokaplex formwork sheet
High format and angle accuracy
Smooth, high-grade concrete surfaces and fast on-site assembly thanks to low tolerances and high format accuracy.
Xface sheet
Large-format formwork sheets for superlative concrete finishes
The Xface sheets' great durability against scratching and vibrator damage, and their large sheet formats, deliver a smooth and uniform concrete appearance with only a small number of joints. Their non-absorbent coating and high-grade edge seal mean that no rippling takes place. The hard-wearing fibre-reinforced synthetic resin coating prevents any splintering when the sheets are nailed, stops them from fraying when they are cut or drilled, and prevents stains on the surface of the concrete. The excellent release properties of the Xface sheet mean that no release agent is needed for the sheets' first few re-use cycles, and make cleaning very easy indeed.
DokaPly
The multi-ply formwork sheets for any site and any usage location
DokaPly is available in both coated and uncoated plywood, from high-grade birch plywood sheets to simple sheets for cutting to size on infill zones.
- DokaPly MDO: the all-purpose plywood sheet for formwork requirements
- DokaPly Birch: the premium birch plywood sheet for smooth concrete finishes
- DokaPly natural: the uncoated plywood sheet for infill zones
DokaPly MDO
The all-purpose plywood sheet for formwork requirements
- Type: 7-layer, cross-bonded plywood
- Surface: MDO (front) and brown phenolic film 145 g/m² (back)
- Size: 2440 x 1220 x 18 mm
- FSC certified
DokaPly Birch
The premium Birch plywood sheet for smooth concrete finishes
- Type: 13-layer, cross-bonded, Nordic Birch plywood
- Surface: coated with phenolic resin film 120 g/m²
- Size: 2440 x 1220 x 18 mm
- FSC certified
DokaPly natural
The uncoated plywood sheet for infill zones
- Type: 7-layer, cross-bonded Brazilian Pine plywood
- Surface: uncoated
- Size: 2440 x 1220 x 18 mm
- FSC certified
Xface sheet
The large-format fair-faced sheet for superlative concrete finishes
- Type: 15-layer Nordic Birch plywood, crosswise veneer layers
- Surface: concrete side with special fibre-reinforced synthetic resin coating; rear side with phenolic-resin coating 120 g/m²
- Excess material for exact blank cut
Dokaplex formwork sheet
High format and angle accuracy
- Type: Nordic Birch plywood, crosswise veneer layers
- Surface: coated with phenolic resin film 220 g/m²
Save time and money:
Buy formwork spares and accessories online.
