Supporting construction frame Universal
The heavy duty supporting construction frame for single-sided walls of up to 12.80 m height
![supporting construction frame universal]()
Universal use
thanks to attachable frame construction- optimum adaptability to required pour-height since compatibility with Supporting construction frame Universal F 4.50m, Attachable frame F 1.50m, Attachable frame F 2.00m, Heavy duty attachable frame F 2.40m
- high flexibility due to suitability for timber-beam and framed formwork
- adapts to uneven ground by means of spindles with articulated footplates
Quick and easy
thanks to ready-to-use frames- simple handling due to integral lifting-brackets enabling the frames to be lifted in their respective centre-of-gravity and ready-mounted couplers for connecting the bracing (scaffolding tubes)
- fast and crane-free re-positioning thanks to easy-to-mount rollers
- frames can be immediately installed – no pre-assembly necessary
- easy vertical stacking due to „attachable frames“ with pre-mounted stacking plates
Comprehensive workplace safety
with compatible ladderways and working platforms- tensile forces are reliably transferred by means of diagonal anchors
- integral spacers prevent stacked frames from sliding off one another during storage and transit
- adjusting for different fresh-concrete pressures required is easy and economical – simply increase or decrease the spacing between the supporting construction frames, as appropriate
- full line of safety accessories for intermediate platforms and pouring platforms, and for access systems
System
Vertical stacking configurations for wall heights of up to 8.10 m
- pour-heights of up to 4.50 m are possible with Supporting construction frames Universal F 4.50m
- pour-heights of up to 6.00 m are possible by adding an Attachable frame F 1.50m
- pour-heights of up to 8.10 m are possible by adding an Attachable frame F 1.50m and an Attachable frame F 2.00m
![supporting construction frame universal]()
![supporting construction frame universal]()
Wall heights above 8.10 m
- for walls of up to 10.40 m in height, the Supporting construction frame F can be stacked on top of an Attachable frame F 2.40m
- When the Supporting construction frame F is stacked on top of two Attachable frames F 2.40m, pour heights of up to 12.80 m are possible
Utilisation
Supporting construction frame Universal F
Single sided walls up to 12.80 m can be formed with the supporting construction frame Universal F. These large and high units can be shifted with attachable rollers.
![supporting construction frame universal]()
![supporting construction frame universal]()
Single-sided walls in a single pour
Combining extra-large Framax Xlife panels with the Supporting construction frame Universal F makes it possible to pour even very high walls in one continuous operation.
Custom applications
Positioned in the horizontal and anchored to the structure, Supporting construction frames can be used to make heavyduty platforms for formwork assignments at lofty heights.
![supporting construction frame universal]()
![supporting construction frame universal]()
