Circular formwork H20
The practical circular formwork for exact curves
The system reduces rental and labor costs at your site by
- being fully assembled into full height units x 8 ft (nominal) wide when they arrive at your jobsite
- low on-site formwork quantities, as it adapts effortlessly to any layout
- delivering pre-assembled elements that are quickly ready for use by adjusting a few spindles built into every panel
- using fewer ties - up to 20 sq. ft. per tie
Circular formwork H20 stands out for great flexibility, thanks to its
- practical height grid
- exact curves to form any circular structure with a radius greater than 12 ft.
- flexible, heavy-duty birch plywood that can easily be nailed or screwed
Efficient construction cycle, as
- there is only one connecting device
- the system can easily be combined with Framax, or Top 50 wall formwork
- setting the radius is easy – simply by turning spindles
- radius is easy to check, using flexible templates
![]()
The practical height grid of the panels and the systematic tie spacing make it possible to set up formwork for many different height combinations.
References
System
Continuously adjustable
The circular formwork elements are easy to adjust. Specially designed spindles allow the circular formwork elements to be precision radii used to match the shaping template.
Easy to combine
A special end-profile makes it easy to connect the system to other Doka formwork systems such as framed formwork Framax Xlife or Top 50.
Optimum element size-grid
- Only two widths of panel (inside element 7'-10" (2.40 m), outside element 8'-2" (2.50 m) )for all radius down to 12 ft.
- Practical height grid with 4 different heights of panel
Utilisation
Radius down to 12 ft.
Each fully pre-assembled element for inside and outside formwork can be precision-shaped for any radius down to 12 ft. to match the shaping template.
Easy to adapt
Circular formwork H20 is easy to adapt to different radii, simply by turning the spindles.
