Formwork

Reliably casting concrete surfaces in the desired fair-faced concrete category is quite a challenge, every time. Doka has the right formwork equipment for all building-work where the surface of the concrete is intended to be a visual element. For perfect outcomes, even on details such as form-tie points and joins, Doka can offer a large number of different accessories for fair-faced concrete.

Doka offers release-agents for both smooth and absorbent formwork surfaces. They have an excellent separating effect and make for attractive concrete surfaces.

Doka panel struts and plumbing struts windproof the formwork and make it easier to plumb and align. The modular combination of plumbing struts, prop heads and prop shoes makes for optimum usability with Doka formwork systems.

Multi-trip packaging items such as containers, stacking pallets and skeleton transport boxes keep everything neat and tidy on the site, minimise the time wasted searching for parts and streamline the storage and transport of system components, small items and accessories. The stacking pallets simplify the storage and handling of floor props, folding tripods, formwork beams and sheets. The skeleton transport box is the tidy way of storing and handling lighter accessories (max. load 700 kg). For heavier accessories, there is plenty of space for these in the Multi-trip transport box (max. load 1500 kg).

Doka multi-ply formwork sheets are used in very many Doka formwork systems. The broad spectrum – ranging from DokaPly to the Xlife sheet – allows Doka to offer ideal solutions for many different requirements and cater for anything from infill zones to fair-faced concrete.

With its optimised ratio between weight and statical attributes, the Forming clamp 10-90cm is the ideal companion for all forming operations on strip footings, drop beams and garden walls.

Dependable form-ties and safe suspension points are crucial for efficient and safe usage of any formwork. For both wall formwork, single-sided formwork and climbing formwork, a complete range of field-proven form-tie solutions and suspension points is available.

Doka floor props are the right choice for every usage situation, and a sturdy 'support' in the rough-and-tumble of everyday work on the site. The anti-handtrap and anti-dropout safeguard, forged nut, galvanised finish and ergonomically shaped fastening clamp are just a few of the features of these premium tubular steel props that have convinced customers all over the world.

With its special design and its load-bearing capacity, the I tec 20 beam opens up some interesting new vistas when it comes to optimising equipment usage on the site. The plastic facing protecting the flange, and the field-proven end reinforcements from the 'top' beams, make this an extraordinarily robust formwork beam.

Doka 3-SO three-ply sheets provide the basis for many Doka formwork systems and have a wide range of uses.

Exactly round columns, in superlative fair-faced concrete quality, can be achieved using Column formwork RS.

Frami Xlife universal panels are ideal for forming column cross-sections by hand or by crane.

Universal panels from the Framax Xlife framed-formwork range are ideal for forming varied cross-sections of column in a 5 cm grid – without needing a dedicated column formwork system on the site.

Circular formwork H20 is a practical circular formwork system that delivers smooth, curved walls from radii of 3.50 m upward – steplessly.

'Supporting construction frames' enable the concreting forces to be safely transferred by way of diagonal anchors in cases where it is not possible to tie wall-formwork elements through the concrete.

Large-area formwork Top 50 is a 'construction kit' large-area formwork system that is pre-assembled on a project-specific basis and is designed to accomplish many very diverse types of task. The shape, size, tie-hole pattern and form-facing of the elements can be adapted to suit any requirement.

The lightweight Frami eco formwork, with its sturdy powder-coated steel frame, is ideal for fast and economical forming, with or without a crane.

Framax Xlife is the framed formwork system that uses only a very few different panel formats to achieve a consistent 15 cm increment-grid, no matter whether the panels are stood upright or on their sides. All the connectors and accessories fit seamlessly into this grid – making for fast forming-times and high efficiency.

Dokaflex 1-2-4 is the fast, versatile floor-slab formwork for any desired layout. The quantities are computed very simply, using the slide-rule, with no need for formwork planning. Meeting individual requirements regarding the concrete finish is no problem, as any type of form-facing can be chosen.

Dokaflex tables are easy and practical to set up and can be shifted and adapted very quickly. This makes them a cost-effective and efficient way of carrying out large-area slab projects. Dokaflex tables can of course be combined with Dokamatic tables.

The innovatively designed Dokamatic table is the fast way to form large areas of slab. The system is optimised to give short forming-times, and copes well with varying structural-design and geometrical requirements. Save on manhours and crane time: with the 'DoKart plus', the tables can easily be travelled to their next location by just one man working on his own.

The shaft platform plus shaft formwork are quick and easy to reposition, in just one crane cycle.

The Platform SCP has room for all the site equipment needed, and is enclosed on all sides for safe, weather-shielded working, even at great heights. Powerful hydraulic cylinders cranelessly raise the platform, formwork, equipment containers and concrete placing boom to the next casting section, in only one lift.

The Guided climbing formwork Xclimb 60 is a system that is guided on vertical profiles fixed to the structure, even during repositioning. The entire climbing unit is safely and easily repositioned in a single crane cycle, even during high winds.

Dam formwork is used for forming one-sided construction projects, such as dams, barrages, river power stations or pylons without formwork ties. The climbing tower will transfer all pouring loads into the previous pouring section. Different system variants D12, D15, D22 and D35 facilitate economic adaptation to various project-specific block dimensions.

This cooling-tower formwork is a fully mechanised, self-climbing large-area formwork system. It maximises rationalisation and minimises manual labour – after a short familiarisation period, the crew will soon be accomplishing the casting sections in a 1-day cycle.

The climbing formwork system for structures that need the formwork elements to be moved up in several casting sections. With only two accessories, the Folding platform K can be turned into a fully functional crane-jumped formwork directly on the site.

Climbing formwork 150F is a tried-and-tested system for crane-lifted climbing projects. It is simply to set up and easy to use.

Automatic climbing formwork Xclimb 60 is a hydraulically climbed system that can also be quickly raised by crane if sufficient craneage is available. Because it is guided on the structure at all times, the system can still be climbed even in windy conditions.

The Load-bearing tower DokaShore is used for supporting e.g. bridge superstructures made of pre-cast concrete members or CIP concrete, turbine platforms and wide-spanned drive-through access openings, cost-effectively and safely.

With the innovative Forming wagon TU, cantilevered parapets can be cost-efficiently cast without disrupting traffic or other construction operations.

The Load-bearing tower Staxo 40 system stands out for being exceptionally easy to handle, and superbly adaptable to any building-construction project.

Staxo 100 eco permits economical shoring of floor-slabs of widely differing layouts, shapes and loads in the building-construction and civil-engineering fields.

With its rugged steel frames, Staxo 100 is designed for large shoring-heights and high loads. It unites high load capacity and safety, in every situation.

The modularly designed Doka heavy-duty supporting system SL-1 provides complete formwork solutions for widely differing tunnel cross-sections, regardless of shape and load.

The modular Tunnel system DokaCC is used in cut-and-cover construction method to form rectangular or round tunnel cross-sections quickly and with fewer materials. The applicability on all common types of foundations provides additional benefit in terms of efficiency.

Combined with a pre-assembled parapet formwork that can be cycled without being dismantled, the travelling Forming wagon T is designed for high cost efficiency.

The Doka composite forming carriage makes for fast, safe construction of bridges on which a concrete deck slab is joined to a steel superstructure. The travelling composite forming carriage carries a large area of pre-assembled composite bridge-deck formwork that can be cycled without being dismantled. It stands out for its excellent adaptability to all circumstances, low-cost assembly from rentable standard components, and its high workplace safety.

The Doka cantilever forming traveller provides certainty regarding planning and costs while ensuring an optimum construction workflow. The perfect design match between the CFT's shoring structure and the formwork, its high standard of safety and its optimised workplace-ergonomic design together ensure that work can progress swiftly and safely.

Doka bridge formwork ParaTop turns Large-area formwork Top 50 into a cantilever arm formwork that can be operated completely from above. The system's innovative insert-shoe makes it easy to erect, and compensates for any installation inaccuracy.

Bridge edge beam formwork T is made up of a very small number of different parts. Its high load-bearing capacity and low dead weight make it a convincing solution.

The Working scaffold Modul is the ideal add-on to Doka wall systems: with this rentable modular platform system, reinforcement operations can be carried out safely and quickly. It is equally suitable for use as a stair tower or a mobile scaffold tower. To speed up the construction workflow still further, the platform units can be repositioned by crane.

The sturdy, stable stair tower can be put together very quickly from frames and pre-assembled stairway elements. Intermediate exits permit safe access to all work-deck levels.

The Pro­tection screen Xclimb 60 lets you carry out construction work in the top building-levels of high-rise projects in great safety, and protected from the weather. Pro­tection screen Xclimb 60 is a hydraulically climbed system that can also be quickly repositioned by crane if sufficient craneage is available. Because it is structure-guided at all times, it can be operated even in windy conditions. The system comes in several versions, giving you the ideal solution for every requirement.

The pre-assembled, fold-out working platforms, with their integrable front/rear and side railings, ladders and self-closing manhole lids, are ready for immediate use and substantially enhance workplace safety. The system can be used on Framax Xlife framed and column formworks, Wall formwork FF20, and Large-area formwork Top 50 and Top 100 tec.

System-based ladderways with integral ladder cages can be attached to Doka wall and column formwork in a few simple steps. These safety accessories can be mounted to the formwork while this is still placed flat on the ground. This ensures complete safety, right from the word "go".

These tried-and-tested systems give your site crew optimum pro­tection and make a significant contribution to a smooth workflow. When the crew are properly protected, they work safely, which also means more rapidly and thus more efficiently – for your success.

Doka folding platforms K are pre-assembled, work-ready scaffold platforms with standardised system components for all usage situations.